Moglice / DWH Calculator
MOGLICE 1000 FLUID (37)
A fluid about the same viscosity as the Moglice P-500 above. Moglice 1000 Fluid differs in that it contains Teflon and results in a 25% to 30% further reduction in friction. It also provides added protection against moisture absorption.
MOGLICE 1000 Putty (41)
A non-slump putty which is easier to spread than Moglice putty hard, still has higher slump resistance.
MOGLICE 1000 SEMI (39)
A thin putty which will run on vertical surfaces; it is commonly used on machines with large flatways because it is easier to flow in quantity than Moglice putty and can be applied with little damming.
MOGLICE 628 (37)
A semi fluid having the consistency of a thin putty and tends to run on a vertical surface with minimal damming required, but will not run off a flat way. It is most commonly used on machines with large flat ways because it is easier to mix, apply and get the component down and aligned.
MOGLICE FL/P (33)
A fluid with a consistency similar to gear oil. It can be injected or poured to produce way systems, quill bores, nuts or tapers. It is also used in the pour and set application technique.
MOGLICE P500 (36)
A slightly thicker fluid with a consistency similar to honey. It is still injectable and is often used in ball nut applications, air bearings and in the production of sub-micron accurate bores.
MOGLICE PUTTY HARD (41)
A no-slump putty and is the most common material used on standard way systems. It can be applied to vertical or overhead surfaces without running or dripping.